ECE Product Resource Guide                                           

Contact Information

Patrick Kane
Director of University Alliance Program

CY8CKIT-059 PSoC® 5LP Prototyping Kit with Onboard Programmer and Debugger

The CY8CKIT-059 PSoC 5LP Prototyping Kit features the CY8C5888LTI-LP097 device from the Cypress PSoC 5LP family. PSoC 5LP is the industry’s most integrated programmable SoC, combining high-precision and programmable analog and digital peripherals with an ARM® Cortex®-M3 CPU in a single chip. Process sensor signals with the 24-bit hardware DFB coprocessor, offload traditional CPU tasks to the CPLD-based Universal Digital Blocks and increase system performance with the peripheral-to-peripheral DMA controller. Integrate high-precision custom 20-bit Analog Front Ends with the Programmable Analog Blocks including opamps, PGAs, filters, comparators, SAR and Delta-Sigma ADCs and the industry's best CapSense touch-sensing solution.

The kit provides access to all the PSoC 5LP device I/Os in a breadboard-compatible format. It features a micro-USB header for creating prototypes with Full Speed USB 2.0 connectivity. The kit is also designed with a convenient snap-able form-factor, allowing users to separate the USB connector with the KitProg Programmer and Debugger from the target board to use them independently. Once done with the prototype, you're still left with a handy SWD programmer! This kit is programmed with the free PSoC Creator IDE. 

This kit can be programmed to be a dual channel 100KHz oscilloscope and waveform generator! Perfect for students to have a very inexpensive piece of test equipment in the online lab environment that is prevalent today. The project details can be found on Github in the CyScope repository. 

For details on academic discounts contact

CY8CPROTO-062-4343W Prototyping Kit with Onboard Programmer and Debugger

CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT Prototyping Kit is a low-cost hardware platform that enables design and debug of PSoC 6 MCUs. It comes with a Murata LBEE5KL1DX module, based on the CYW4343W combo device, industry-leading CapSense for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone, and a thermistor. This kit is designed with a snap-away form-factor, allowing the user to separate the different components and features that come with this kit and use independently. In addition, support for Digilent's Pmod interface is also provided with this kit.


  • Support of up to 2MB Flash and 1MB SRAM
  • Dedicated to SDHC to interface with WICED wireless devices
  • Delivers dual-cores, with a 150-MHz Arm Cortex-M4 as the primary application processor and a 100-MHz Arm Cortex-M0+ as the secondary processor for low-power operations. 
  • Supports Full-Speed USB, capacitive-sensing with CapSense, a PDM-PCM digital microphone interface, a Quad-SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks 
  • Programmed with Free ModusToolbox IDE

    For details on academic discounts contact