June 2020
Partner Product
Blockade
We’ve seen many interesting and inspiring 3D printed rover robot projects over the years and are grateful for how 3D printing technology has helped the robotic community to grow more diverse in design and material choices. Khang Nguyen, on behalf of Circuit Specialists would like to make a small contribution to the robotic community by publishing this MrK_Blockvader on Instructables for the Maker Community.
MrK_Blockvader is a fun and interactive project where looks can be deceiving. This robot utilizes a tiny buzzer and could be equipped with a color sensor, distance sensor, a radio module to communicate with other Blocky with alike capability, with a base or with a controller.
MrK_Blockvader will be part of a robot network where one can be assigned as the commander to a group of robots to achieve the same objective.
Supplies:
1 * Arduino Nano
1 * DC motor driver
2 * DC motor with gearbox
1 * 650 mAh Venom LiPo battery
2 * 1/24 RC truck wheels
2 * White LEDs
1 * Distance sensor
1 * Color sensor
1 * nRF24 breakout board
1 * nRF24 radio board
1 * Buzzer
1 * Switch
1* 26 AUG Black wire
1* 26 AUG Blue wire
1* 22 AUG Black wire
1* 22 AUG Red wire